tools that are used for shortening watch bracelets
Hare are some
tools that you may concider using to adjust
or shorten a watch bracelet
This picture show you ware
to adjust a watch bracelet
Moving the spring bar along
reduces the length of the watch bracelet
insert a spring bar remover into the hole
to release the spring bar the move the end
of the bracelet long reinserting the spring
Shortening a bracelet. Inspect
the bracelet to ware you can take a link
Pushing down on link pin to remove it,
you may find a pair of pliers come in
useful when doing this.
The picture shows the three
link pins removed for when removing 1 Link.
The picture shows 1 Link.
The picture shows the two
link pins after the 1 Link has been removed.
Reinsert the Link pins.
The picture shows replacing the link pins
with a small hammer.
You can also use a press