Tools rolex case opener and closing for repairing watches

T11-1 This Demagnetiser is used for demagnetising watches.
When the watch stops and you see the second hand moving back wards and forwards the watch needs demagnetising,

(1) Plug the demagnetiser into the mains 240 volt.
(2) Place the watch face up on the Demagnetiser
(3) Then press the orange button,
(4) Slide the watch along the surface of the demagnetiser
(5) This demagnetises the watch
(6) The watch should now be ready for use. 350 Gms

T11-2 This tool is for removing, replacing a cristle watch glass, the raised type. (Not the flat type).200 Gms

T11-3 Quartz Pulse Tester for Analogue Watches Batteries & Coils, test the watch without removing the back cover.

Place the Watch or the Module in position. Switch to ON immediately the green LCD will light up and the pulse sound will be audible, this indicates that the electronic system of the watch is OK. A very weak pulse sound indicates a damaged watch coil

T11-4 This Demagnetiser is used for demagnetising watches. When the watch stops and you see the second hand moving back wards and forwards the watch needs demagnetising,

T11-5 4-in-1 Digital Caliper Gauge Specifcations and Function
These Digital Caliper are made of Metal
(1) Step measuring face.
(2) Inside Measuring Jaws
(3)Cover,
(4) 4.mm/in change and power on
(5) LCD display
(6) Outside measuring jaws
(7) Measuring range: 0-150mm 0-6"..
(8) Resolution 0.1mm 0.01"
(9) Repeseatability 0.1mm 0.01"
(10) Maximum mspeed: 1.5m/sec, 60"/sec
(11) Measuring system: Non-linear CAP measuring 100Gms

Click to Enlarge

T11-6 Battery Tester for button cell, Silver Oxside, Lithium, Alkaline AA, R6, AAA, R03, C, R14, D, R20, PP3, 6F22, 6LR61, MN1604, 0068, A1604, GP1604P, 1604D, PP3S, MN16049V, 9 volt 50Gms

T11-7 Battery Tester with Analogue Meter upto 3 volt. 100 Gms

T11-8 Battery Testing Tweezer

Previous Page 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Next Page